Монтирование внешнего накопителя
Засовываем 🙂
root: Unknown USB device: vendor 0x058f product 0x6387 bus uhub1
kernel: ugen1.2: <JetFlash> at usbus1
kernel: umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr 2> on usbus1
kernel: umass0: SCSI over Bulk-Only; quirks = 0x0100
kernel: umass0:0:0:-1: Attached to scbus0
kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
kernel: (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
kernel: (probe0:umass-sim0:0:0:0): SCSI status: Check Condition
kernel: (probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed)
kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
kernel: da0: <JetFlash TS4GJFV10 8.07> Removable Direct Access SCSI-2 device
kernel: da0: 40.000MB/s transfers
kernel: da0: 3899MB (7987198 512 byte sectors: 255H 63S/T 497C)
kernel: GEOM: da0: partition 1 does not start on a track boundary.
kernel: GEOM: da0: partition 1 does not end on a track boundary.
Читать далее…
